SC APC to SC APC Simplex OS2 Single Mode PVC (OFNR) 2.0mm Fiber Optic Patch Cable (for NetLink Trust, OpenNet, SingNet, Starhub, MyRepublic, LGA, ViewQwest, WhizComms)

To connect NetLink Trust (formerly OpenNet) Termination Point to Singtel, SingNet, M1, Starhub, MyRepublic, LGA, ViewQwest, WhizComms and other service provider's Optic Network Terminal (ONT) Box

The SC connectors on this simplex fiber optic patch cord have a APC "Angled Physical Contact" polish on the fiber optic connector end faces. An APC connector has an 8º angle cut into the ferrule. These connectors are identifiable by their green color. APC fiber ends have low back reflection even when disconnected. This polish results in a highly radius domed end face surface that optimizes physical contact between the mated fiber cores. 

OS2 Singlemode cables are the best fiber choice for outdoor and burial use due to their internal construction and ability to transmit over long distances. With a thinner core that only allows for one wave of light to be carried, OS2 Singlemode cables are typically more stable and have less distortion than multimode options 

Optical Fiber Nonconductive Riser (OFNR) Cables will prevent the fire from one floor to another.  They are used for riser applications. It is non-conductive and is resistant to oxidation and degradation. It cannot be used to plenum areas but OFNP cables are compatible to rise applications. If you want to use it in a building, the structure must have a confined ventilation system and fire exits.

Connector Type	SC to SC	Polish Type	APC to APC
Fiber Mode	OS2 9/125μm	Wavelength	1310/1550nm
Insertion Loss	≤0.3dB	Return Loss	≥60dB
Fiber Grade	G.657.A1 (Compatible with G.652.D)	Minimum Bend Radius	10mm
Attenuation at 1310 nm	0.36 dB/km	Attenuation at 1550 nm	0.22 dB/km
Fiber Count	Simplex	Cable Diameter	2.0mm
Cable Jacket	PVC	Polarity	A(Tx) to B(Rx)
Operating Temperature	-20~70°C	Storage Temperature	-40~80°C

 

Applications

1) Connects Opennet Terminal Point (ONT) to Optical Network Terminal/Router, Exended Fiber Point

2) Telecommunication networks

3) Local area networks (LAN)

4) Wide area networks (WAN)

5) Premise installations

6) Data processing networks

7) Video and military active device termination 

Product Highlights

Industry Standard Fiber Optic Cable

The fiber optic cable has industry standard flammability rating PVC jacket and simplex fiber connector which meets EIA/TIA 604-2 for high speed cabling networks.

 

G.657.A1 Bend Insensitive Fiber

 

BIF Cable can be stapled and bent around corners without sacrificing performance.

10mm Minimum Bend Radius

The bend performance improves duct utilization, enabling smaller enclosures.

Zirconia Ceramic Ferrule

Optimum IL and RL ensure stable signal transmission, protecting your network safety.

Bend Insensitive Fiber Optic Cable Structure

A unique refractive trench with low refractive index glass layer in BIF, which reduces in light dispersion upon twisting and bending, ensuring network transmission stably and fast.

---

Questions & Answers

• Q: Is this cable suitable for outdoor use? What is the effect if I use it outdoors? 
• A: No, this patch cable only can be used for indoor. If used outdoors, the cable may be damaged soon, and the loss will also be affected. We recommend the military-grade fiber patch cable for outdoor use.  

• Q: Is this connector length included in the total cable length? For example, for a 1m cable, is the length distribution a 0.02m connector + 0.96m cable + 0.02m connector or a 0.06m connector + 1m cable + 0.06m connector?
  A: The connector length of 0.02m is included in the total length. The total length is the distance from the connector ferrule at one end to the ferrule at the other end. 

• Q: What is the max pulling force that can be applied during installation for the standard cable? 
  A: Thanks for your question. The max pulling force during the cable installation is 70N.