Description
APC UPS Smart-UPS 3000VA LCD 230V with SmartConnect SMT3000IC (3 Years Manufacture Local Warranty In Singapore)
Features
-
Cold-start capableProvides temporary battery power when the utility power is out.
-
Energy meterProvides actual kilowatt hours of usage for energy conscious users.
-
Green modePatent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
-
High online efficiencyReduces utlility costs, generates less heat.
-
Intuitive LCD interfaceProvides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.
-
Predictive replace battery dateDynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning.
-
Pure sine wave output on batterySimulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.
-
Sequenced network shutdown and rebootCustomize network shutdown and reboot sequence of connected servers and UPSs.
-
Single switched outlet groupSingle outlet group that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off and non-critical load shedding.
-
SmartSlotCustomize UPS capabilities with management cards.
-
StruxureWare Data Center Expert compatibleEnables centralized management via StruxureWare Data Center Expert.
-
Temperature-compensated battery chargingProlongs battery life by regulating the charge voltage according to battery temperature.
Smart-UPS Features & Benefits
Manageability
-
USB connectivityProvides management of the UPS via a USB port (not available on all models).
-
Serial connectivityProvides management of the UPS via a serial port.
-
Disconnected battery notificationWarns when a battery is not available to provide backup power.
-
Network manageableProvides remote power management of the UPS over the network.
-
Audible alarmsActively let you know if the unit is on battery, if the battery is low or if there is an overload condition.
-
LED status indicatorsQuickly understand unit and power status with visual indicators.
Adaptability
-
Adjustable voltage-transfer pointsMaximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.
-
Adjustable voltage sensitivityProvides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
Serviceability
-
Battery failure notificationProvides early-warning fault analysis on batteries enabling timely preventive maintenance
-
Hot-swappable batteriesEnsures clean, uninterrupted power to protected equipment while batteries are being replaced
-
User-replaceable batteriesIncreases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
-
Resettable circuit breakersEnables a quick recovery from overload events.
-
Predictive failure notificationProvides early-warning fault analysis ensuring proactive component replacement.
Marketing Features
-
Save time with easy and convenient remote accessibilityNetwork manageable via serial, USB or optional ethernet. Includes Powerchute® Business Edition Software for convenient monitoring and control, safe operating system shutdown and innovative energy management capabilities.
-
Avoids costly power problems by keeping your IT equipment and data safe and availableNetwork grade power conditioning protects from damaging surges and disruptive noise. Solid state automatic voltage regulation boosts low input voltage up to 30% and trims high voltage up to 12% without battery operation. Reliable battery back-up capacity to power through outages or gracefully shutdown systems
-
Low operating and maintenance costs with high efficiency, proven reliability and intelligent battery managementPatented green operating mode achieves efficiencies over 97%. Smart-ups was the first network UPS to be Energy Star certified. Intelligent battery management, pioneered by APC, maximizes battery performance and life through intelligent, precision temperature compensated charging. Dynamic battery replacement date indicator and automatic self tests insure battery reliability and warn in advance of needing replacement. Convenient, easy to connect, hot-swappable battery modules provide battery replacement without powering down. Designed and manufactured by APC for over 23 years, Smart-UPS is the world’s most trusted network UPS with over 25 million units sold.
-
Peace of mind that comes with full equipment compatibility and reliability of a leaderProvides pure sine wave output which is recommended by server manufacturers using active power factor corrected (PFC) power supplies. Safety agency tested and approved means that you can deploy Smart-UPS with confidence that they meet or exceed the industry’s most rigorous standards.
-
Smarter productivity with ability to tailor to your specific application needsIntuitive LCD interface provides clear information with the ability to configure the UPS locally with easy to use navigation keys. Over 15 different programmable settings including switched outlet group control allow for application specific settings, thresholds and notifications.
Availability
-
Power conditioningProtects connected loads from surges, spikes, lightning, and other power disturbances.
-
Intelligent battery managementMaximizes battery performance, life, and reliability through intelligent, precision charging.
-
Temperature-compensated battery chargingProlongs battery life by regulating the charge voltage according to battery temperature.
-
Boost and Trim Automatic Voltage Regulation (AVR)Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).
-
Automatic restart of loads after UPS shutdownAutomatically starts up the connected equipment upon the return of utility power.
-
Automatic self-testPeriodic battery self-test ensures early detection of a battery that needs to be replaced.
-
Disconnected battery notificationWarns when a battery is not available to provide backup power.
Safety
-
Safety-agency approvedEnsures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
TECHNICAL SPECIFICATION
Output
-
Output power capacity2.7 KWatts / 3.0 kVA
-
Max Configurable Power (Watts)2.7 KWatts / 3.0 kVA
-
Nominal Output Voltage230V
-
Output Voltage NoteConfigurable for 220 : 230 or 240 nominal output voltage
-
Output Voltage DistortionLess than 5% at full load
-
Output Frequency (sync to mains)47 - 53 Hz for 50 Hz nominal, 57 - 63 Hz for 60 Hz nominal
-
TopologyLine Interactive
-
Waveform typeSine wave
-
Output Connections(8) IEC 320 C13 (Battery Backup)(2) IEC Jumpers (Battery Backup)(1) IEC 320 C19 (Battery Backup)
-
Transfer Time2ms typical
Input
-
Nominal Input Voltage230V
-
Input frequency50/60 Hz +/- 3 Hz (auto sensing)
-
Input ConnectionsIEC-320 C20, Schuko CEE 7 / EU1-16P, British BS1363A
-
Input voltage range for main operations160 - 286V
-
Input voltage adjustable range for mains operation151 - 302V
-
Number of Power Cords1
-
Other Input Voltages220, 240
Batteries & Runtime
-
Battery typeMaintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
-
Typical recharge time3hour(s)
-
Replacement BatteryRBC55
-
Expected Battery Life (years)3 - 5
-
RBC Quantity1
-
Extendable Run Time1
-
Runtime
-
Efficiency
Communications & Management
-
Interface Port(s)SmartSlot , USB
-
Control panelMulti-function LCD status and control console
-
Audible AlarmAlarm when on battery : distinctive low battery alarm : configurable delays
-
Emergency Power Off (EPO)Yes
-
Available SmartSlot™ Interface Quantity1
Surge Protection and Filtering
-
Surge energy rating365Joules
-
FilteringFull time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449
Physical
-
Maximum Height435mm , 43.5CM
-
Maximum Width197mm , 19.7CM
-
Maximum Depth544mm , 54.4CM
-
Net Weight52.5KG
-
Shipping weight63.7KG
-
Shipping Height699mm , 69.9CM
-
Shipping Width381mm , 38.1CM
-
Shipping Depth762mm , 76.2CM
-
ColorBlack
-
Units per Pallet9.0
Environmental
-
Operating Temperature0 - 40 °C
-
Operating Relative Humidity0 - 95 %
-
Operating Elevation0-3000meters
-
Storage Temperature-15 - 45 °C
-
Storage Relative Humidity0 - 95 %
-
Storage Elevation0-15000meters
-
Audible noise at 1 meter from surface of unit53.0dBA
-
Online thermal dissipation375.0BTU/hr
Conformance
-
ApprovalsCE, CSA, EAC, EN/IEC 62040-1, EN/IEC 62040-2, RCM, VDE
-
Standard warranty3 years repair or replace (excluding battery) and 2 year for battery, optional on-site warranties available, optional extended warranties available
Manuals and Warranties
Also seen in the collections
Related Products
Full Collection for APC
APC PDU
APC Rack PDU Switched 2U 32A 230V (16) C13 (AP7922B) (2 Years Manufacture Local Warranty In Singapore)
Original price:$ 1,540.00 SGD
Current price: $ 1,260.00 SGD
APC Rack PDU Switched 1U 16A 208-230V (8) C13 (AP7921B) (2 Years Manufacture Local Warranty In Singapore)
Original price:$ 1,050.00 SGD
Current price: $ 936.00 SGD
APC Rack PDU Switched 1U 12A 208V 10A 230V (8) C13 (AP7920B) (2 Years Manufacture Local Warranty In Singapore)
Original price:$ 985.00 SGD
Current price: $ 859.00 SGD
APC Rack PDU 2G Switched ZeroU 32A 230V (21) C13 (3) C19 (AP8953) (2 Years Manufacture Local Warranty In Singapore)
Original price:$ 1,785.00 SGD
Current price: $ 1,348.00 SGD
APC Rack PDU 9000 Switched ZeroU 32A 230V C13 C19 (APDU9953) (2 Years Manufacture Local Warranty In Singapore)
Original price:$ 1,780.00 SGD
Current price: $ 1,569.41 SGD
APC Rack PDU 2G Metered ZeroU 32A 230V (36) C13 (6) C19 (AP8853) (2 Years Manufacture Local Warranty In Singapore)
Original price:$ 970.00 SGD
Current price: $ 874.12 SGD
APC Rack PDU Switched ZeroU 10A 230V (16) C13 (AP7950B) (2 Years Manufacture Local Warranty In Singapore)
Original price:$ 1,540.00 SGD
Current price: $ 1,371.76 SGD
APC Rack PDU 2G Metered ZeroU 16A 100-240V (18) C13 (2) C19 (AP8858) (2 Years Manufacture Local Warranty In Singapore)
Original price:$ 780.00 SGD
Current price: $ 654.00 SGD
APC Rack PDU 2G Metered ZeroU 16A 230V (18) C13 (2) C19 IEC309 cord (AP8858EU3) (2 Years Manufacture Local Warranty In Singapore)
Original price:$ 850.00 SGD
Current price: $ 762.35 SGD
APC Rack PDU Metered 2U 32A 230V (12) C13 (4) C19 (AP7822B) (2 Years Manufacture Local Warranty In Singapore)
Original price:$ 1,453.00 SGD
Current price: $ 1,263.53 SGD
APC Rack PDU Metered ZeroU 10A 230V (16) C13 (AP7850B) (2 Years Manufacture Local Warranty In Singapore)
Original price:$ 780.00 SGD
Current price: $ 684.71 SGD
APC Rack PDU Basic 1U 16A 208-230V (12) C13 (AP9565) (2 Years Manufacture Local Warranty In Singapore)
Original price:$ 285.00 SGD
Current price: $ 261.00 SGD
APC Rack PDU BASIC 1U 16A 208-230V (10) C13 (2) C19 (AP9559) (2 Years Manufacture Local Warranty In Singapore)
Original price:$ 450.00 SGD
Current price: $ 358.82 SGD
APC Rack PDU Basic ZeroU 16A 230V (20) C13 (4) C19 IEC309 10ft cord (AP7554) (2 Years Manufacture Local Warranty In Singapore)
Original price:$ 525.00 SGD
Current price: $ 488.24 SGD
APC Rack PDU Basic ZeroU 32A 230V (20) C13 (4) C19 (AP7553) (2 Years Manufacture Local Warranty In Singapore)
Original price:$ 685.00 SGD
Current price: $ 541.18 SGD
APC Rack PDU Basic ZeroU 16A 230V (20) C13 (4) C19 IEC C20 (AP7552)(2 Years Manufacture Local Warranty In Singapore)
Original price:$ 565.00 SGD
Current price: $ 436.00 SGD
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.